- UL LISTED
- MADE OF STAINLESS STEEL AND MANUFACTURED IN THE U.S.A.
- RATED NEMA 3R (RAINPROOF)
- BUILT-IN, LOCKABLE WHILE IN-USE, STAINLESS STEEL COVER
- SPACING BETWEEN COVER AND PEDESTAL TO SAFELY ALLOW CORDS TO PASS WHILE LOCKED & IN-USE
“C” = PAINTED STAINLESS STEEL (*INSERT COLOR: G= *INSERT COLOR: G = GRAY, B = BLACK, BR = BROWN, GN = GREEN)
EXAMPLE: 5P24-C-HT-1-G (24″ TWO GANG HINGE TOP WITH BASE POWDER COATED IN GRAY)
“SS” = POLISHED STAINLESS STEEL FOR A BRUSHED FINISH LOOK (TEA STAIN WAIVER REQ’D)
EXAMPLE: 5P24-SS-HT-1 (24″ TWO GANG HINGE TOP WITH BASE WITH A POLISHED/BRUSHED STAINLESS FINISH)
18", 24", 30", 36", 42" AND 48"
POLISHED STAINLESS OR POWDER COAT PAINT
2 GANG / 30 AMP / 2 GANG DIVIDED FOR POWER/DATA
AVAILABLE COLORS (Colors simulated)
- SPEC INFO
- ADDITIONAL RECEPTACLE MOUNTING INSERT CONFIGURATIONS
- UL INSTALLATION INSTRUCTIONS
Yes, this model was specifically designed to close, and be locked, while in-use. There is a gap between the cover and the body to accommodate 4 x 1” conduits.
The diameter of the locking hole is .300”.
Yes, ¼” x 2-¼” mounting hardware kits are included with models 36” or less. Hardware for 42” & 48” models include 3/8” x 2.75” kits. Kits include stainless steel anchor bolts, washers, and acorn nuts.
Yes, mounting inserts to accommodate a standard two gang GFCI receptacle is included.
Yes. Please see the additional mounting insert configuration drawing.
Yes, this model may be ordered with a divider for high/low voltage.
All of our pedestals are made from 304 14 gauge stainless steel and have a 7 gauge 304 stainless steel welded baseplate. They are then either painted with a powder coat or polished to a brushed finish.
Since PEDOC has no control over where the pedestals are installed, we require the waiver to be signed and returned with PO submission. They are not suited to be installed near salt water since 304 stainless steel is not marine grade.
This model is rated up to 30 amp.
Per our UL listing, some modifications are allowed. Please call us to discuss your needs.
All of our products are manufacture in and sold from just outside of Chicago, IL.
No, not at this time, per our UL Listing.
We do not sell or supply receptacles. Please refer to your preferred supply house. Any standard GFCI receptacle will align with our tapped mounting holes.
Please see the “UL Installation Instructions” document for details.
The diameter of the pedestal base is 8” and the mounting pad should be determined by designer/installer. Please contact your building inspector for any city requirements.
Warranty & Close-Out Documents
All items considered custom and made per order. Returns only allowed due to material defect with RMA.