- UL LISTED
- MADE OF STAINLESS STEEL AND MANUFACTURED IN THE U.S.A.
- RATED NEMA 3R (RAINPROOF)
- LOCKABLE WHILE IN-USE, BUILT-IN, STAINLESS STEEL COVER
- SPACING BETWEEN COVER AND PEDESTAL TO SAFELY ALLOW CORDS TO PASS WHILE LOCKED & IN-USE
“C” = PAINTED STAINLESS STEEL (*INSERT COLOR: G= *INSERT COLOR: G = GRAY, B = BLACK, BR = BROWN, GN = GREEN)
EXAMPLE: 142-C-HT-GN (42″ ONE GANG HINGE TOP WITHOUT BASE POWDER COATED IN GREEN)
“SS” = POLISHED STAINLESS STEEL FOR A BRUSHED FINISH (TEA STAIN WAIVER REQ’D)
EXAMPLE: 142-SS-HT (42″ ONE GANG HINGE TOP WITHOUT BASE WITH A POLISHED/BRUSHED STAINLESS FINISH)
42", 48" and 54"
POLISHED STAINLESS OR POWDER COAT PAINT
DIVIDER FOR POWER/DATA AVAILALBE
AVAILABLE COLORS (Colors simulated)
MODEL NUMBERS (Drawings Linked)
HEIGHT STANDARD ONE GANG DIVIDED FOR HIGH/LOW VOLTAGE
42" 142-C-HT-* or 142-SS-HT 142-C-D-HT-* or 142-SS-D-HT
48" 148-C-HT-* or 148-SS-HT 148-C-D-HT-* or 148-SS-D-HT
54" 154-C-HT-* or 154-SS-HT 154-C-D-HT-* or 154-SS-D-HT
Yes, this model was specifically designed to close, and be locked, while in-use. There is a gap between the cover and the body to accommodate 4 x 1” conduits.
Yes, mounting inserts to accommodate a standard one gang GFCI receptacle is included.
Yes. Models divided for high and low voltage include a mounting plate with both a single gang and two data ports openings.
The diameter of the locking hole is .300”.
Per our UL listing, this model must be buried 24” below grade. The 48” and 54” will allow enough space for the full panel to be accessed.
All of our pedestals are made from 304 14 gauge stainless steel and have a 7 gauge 304 stainless steel welded baseplate. They are then either painted with a powder coat or polished to a brushed finish.
Since PEDOC has no control over where the pedestals are installed, we require the waiver to be signed and returned with PO submission. They are not suited to be installed near salt water since 304 stainless steel is not marine grade.
This model is rated up to 20 amp.
Per our UL listing, some modifications are allowed. Please call us to discuss your needs.
All of our products are manufactured in and sold from just outside of Chicago, IL.
No, not at this time, per our UL Listing.
We do not sell or supply receptacles. Please refer to your preferred supply house. Any standard GFCI receptacle will align with our tapped mounting holes.
Warranty & Close-Out Documents
All items considered custom and made per order. Returns only allowed due to material defect with RMA.