INTENDED FOR HARDSCAPE APPLICATIONS. MADE OF STAINLESS STEEL AND RATED UP TO 60 AMP MAX. ALSO ALSO AVAILABLE WITH A DIVIDER FOR HIGH/LOW VOLTAGE .

View More Products Request a Quote

“C” = PAINTED STAINLESS STEEL (*INSERT COLOR: G= *INSERT COLOR: G = GRAY, B = BLACK, BR = BROWN, GN = GREEN)
EXAMPLE: 2P36-C-D-B (36″ TWO GANG DIVIDED FOR POWER/DATA WITH BASE POWDER COATED IN BROWN)
-OR-
“SS” = POLISHED STAINLESS STEEL FOR A BRUSHED FINISH LOOK (TEA STAIN WAIVER REQ’D

EXAMPLE: 2P36-SS-D (36″ TWO GANG DIVIDED FOR POWER/DATA WITH POLISHED/BRUSHED FINISH)

 

PRODUCT INFORMATION & OPTIONS

ONE GANG (HOUSES 1 DUPLEX RECEPTACLE)

AVAILABLE HEIGHTS:

6", 12", 18", 24", 30", 36", 42" AND 48"

FINISH:

POLISHED STAINLESS OR POWDER COAT PAINT

MAX WATTAGE:

60 AMP

RECEPTACLE MOUNT:

HORIZONTAL (HZ) OR VERTICAL (V)

TWO GANG (HOUSES 2 DUPLEX RECEPTACLES)

AVAILABLE HEIGHTS

6", 12", 18", 24", 30", 36", 42" AND 48"

FINISH:

POLISHED STAINLESS OR POWDER COAT PAINT

MAX WATTAGE:

60 AMP

RECEPTACLE MOUNT:

ALWAYS VERTICAL

TWO GANG DIVIDED FOR POWER & DATA

AVAILABLE HEIGHTS

6", 12", 18", 24", 30", 36", 42" AND 48"

FINISH:

POLISHED STAINLESS OR POWDER COAT PAINT

MAX WATTAGE:

60 AMP

RECEPTACLE MOUNT:

ALWAYS VERTICAL

STANDARD COLORS (COLORS SIMULATED)

BLACK
GRAY
GREEN
BROWN

**UL REQUIRES 12” MIN. DISTANCE FROM FINAL FINISHED GRADE TO LOWEST LIVE WIRES (18″ AND TALLER MODELS CONFORM). 6″ AND 12″ REQUIRE RAISED MOUNTING BASE IN FIELD**

C” = PAINTED STAINLESS STEEL (*INSERT COLOR: G= *INSERT COLOR: G = GRAY, B = BLACK, BR = BROWN, GN = GREEN)
EXAMPLE: 2P30-C-D-B (30″ TWO GANG DIVIDED FOR POWER/DATA POWDER COATED IN BLACK)
-OR-
“SS” = POLISHED STAINLESS STEEL FOR A BRUSHED FINISH (TEA STAIN WAIVER REQ’D)
EXAMPLE: 2P30-SS-D (30″  TWO GANG DIVIDED FOR POWER/DATA WITH BASE WITH A BRUSHED STAINLESS FINISH)

HEIGHTONE GANG - HORIZONTALONE GANG - VERTICALTWO GANGTWO GANG DIVIDED FOR HIGH/LOW VOLTAGE
6"1P6-C-HZ-* or 1P6-SS-HZ1P6-C-V-* or 1P6-SS-V2P6-C-* or 2P6-SS2P6-C-D-* or 2P6-D-SS
12"1P12-C-HZ-* or 1P12-SS-HZ1P12-C-V-* or 1P12-SS-V2P12-C-* or 2P12-SS2P12-C-D-* or 2P12-SS-D
18"1P18-C-HZ-* or 1P18-SS-HZ1P18-C-V-* or 1P18-SS-V2P18-C-* or 2P18-SS2P18-C-D-* or 2P18-SS-D
24"1P24-C-HZ-* or 1P24-SS-HZ1P24-C-V-* or 1P24-SS-V2P24-C-* or 2P24-SS2P24-C-D-* or 2P24-SS-D
30"1P30-C-HZ-* or 1P30-SS-HZ1P30-C-V-* or 1P30-SS-V2P30-C-* or 2P30-SS2P30-C-D-* or 2P30-SS-D
36"1P36-C-HZ-* or 1P36-SS-HZ1P36-C-V-* or 1P36-SS-V2P36-C-* or 2P36-SS2P36-C-D-* or 2P36-SS-D
42"1P42-C-HZ-* or 1P42-SS-HZ1P42-C-V-* or 1P42-SS-V2P42-C-* or 2P42-SS2P42-C-D-* or 2P42-SS-D
48"1P48-C-HZ-* or 1P48-SS-HZ1P48-C-V-* or 1P48-SS-V2P48-C-* or 2P48-SS2P48-C-D-* or 2P48-SS-D

General

All of our pedestals are made from 304 14 gauge stainless steel and have a 7 gauge 304 stainless steel welded baseplate. They are then either painted with a powder coat or polished to a brushed finish.

Yes.

This model is rated up to 60 amp.

Yes, this model may be ordered with a divider for high/low voltage.

Per our UL listing, some modifications are allowed. Please call us with questions.

Yes.

Yes.

All of our products are manufactured in and sold from just outside of Chicago, IL.

Since PEDOC has no control over where the pedestals are installed, we require the waiver to be signed and returned with PO submission. They are not suited to be installed near salt water since 304 stainless steel is not marine grade.

No, not at this time, per our UL Listing.

No, please refer to your preferred supply house. Any standard GFCI receptacle will align with our tapped mounting holes.

Installation

The diameter of the pedestal base is 8” and the mounting pad should be determined by designer/installer. Please contact your building inspector for any city requirements.

Submittal Documents

Warranty & Close-Out Documents

Please refer to the model page for drawings, spec sheets and installation instructions. Contact info@pedocpower.com if additional information is needed.