FOR DIRECT BURIAL APPLICATIONS – OR – WITH A PEDESTAL MOUNTING BASE (PMB) ACCESSORY. MADE OF STAINLESS STEEL AND RATED UP TO 60 AMP MAX.

ALSO AVAILABLE WITH A DIVIDER FOR HIGH/LOW VOLTAGE.

“C” = PAINTED STAINLESS STEEL (*INSERT COLOR: G= *INSERT COLOR: G = GRAY, B = BLACK, BR = BROWN, GN = GREEN)
EXAMPLE: 154-C-V-B (54″ ONE GANG WITH VERTICAL OPENING WITHOUT BASE POWDER COATED IN BLACK)

-OR-
“SS” = POLISHED STAINLESS STEEL FOR A BRUSHED FINISH LOOK (TEA STAIN WAIVER REQ’D)
EXAMPLE: 154-SS-V (54″  ONE GANG WITH VERTICAL OPENING WITHOUT BASE IN A POLISHED/BRUSHED STAINLESS FINISH)

 

PRODUCT INFORMATION

ONE GANG (HOUSES 1 DUPLEX RECEPTACLE)

AVAILABLE HEIGHTS:

42", 48" AND 54"

FINISH:

POLISHED STAINLESS OR POWDER COAT PAINT

MAX WATTAGE:

60 AMP

RECEPTACLE MOUNT:

HORIZONTAL (HZ) OR VERTICAL (V)

TWO GANG (HOUSES 2 DUPLEX RECEPTACLES)

AVAILABLE HEIGHTS:

42", 48" AND 54"

FINISH:

POLISHED STAINLESS OR POWDER COAT PAINT

MAX WATTAGE:

60 AMP

RECEPTACLE MOUNT:

ALWAYS VERTICAL

TWO GANG (DIVIDED FOR POWER/DATA)

AVAILABLE HEIGHTS:

42", 48" AND 54"

FINISH:

POLISHED STAINLESS OR POWDER COAT PAINT

MAX WATTAGE:

60 AMP

RECEPTACLE MOUNT:

ALWAYS VERTICAL

STANDARD COLORS (COLORS SIMULATED)

BLACK
GRAY
GREEN
BROWN

MODEL NUMBERS (drawings linked)
HEIGHTONE GANG - HORIZONTALONE GANG - VERTICALTWO GANGTWO GANG DIVIDED FOR HIGH/LOW VOLTAGE
42"142-C-HZ-* or 142-SS-HZ142-C-V-* or 142-SS-V242-C-* or 242-SS242-C-D-* or 242-SS-D
48"148-C-HZ-* or 148-SS-HZ148-C-V-* or 148-SS-V248-C-* or 248-SS248-C-D-* or 248-SS-D
54"154-C-HZ-* or 154-SS-HZ154-C-V-* or 154-SS-V254-C-* or 254-SS254-C-D-* or 254-SS-D

General


Per our UL listing, this model must be buried 24” below grade. The 48” and 54” will allow enough space for the full panel to be accessed.

Since PEDOC has no control over where the pedestals are installed, we require the waiver to be signed and returned with PO submission. They are not suited to be installed near salt water since 304 stainless steel is not marine grade.

This model is rated up to 60 amp.

Yes, the two gang model may be ordered with a divider for high/low voltage.

Per our UL listing, some modifications are allowed. Please call us with questions.

All of our products are manufactured in and sold from just outside of Chicago, IL.

No, not at this time, per our UL Listing.

No, please refer to your preferred supply house. Any standard GFCI receptacle will align with our tapped mounting holes.

Installation


The diameter of the pedestal base is 8” and the mounting pad should be determined by designer/installer.  Please contact your building inspector for any city requirements.

Submittal Documents


Warranty & Close-Out Documents


Please refer to the model page: TWO GANG (5x5) WITH BASE for drawings, spec sheets and installation instructions. Contact info@pedocpower.com if additional information is needed.